Compressive Strength Formula
Compressive strength formula for any material is the load applied at the point of failure to the cross-section area of the face on which load was applied.
Compressive Strength = Load / Cross-sectional Area
Showing posts with label Autocad House Plane. Show all posts
Showing posts with label Autocad House Plane. Show all posts
Compressive Strength Definition
Compressive Strength Definition
Compressive strength is the ability of material or structure to carry the loads on its surface without any crack or deflection. A material under compression tends to reduce the size, while in tension, size elongates.
In Case If Concrete Box Girder Bridges How Is The Number Of Cells Determined?
When the depth of a box girder bridge exceed 1/6th or 1/5th of the bridge width then the design recommended is that of a single cell box girder bridge. But in case the depth of the bridge is lower than 1/6th of the bridge width then a twin-cell or in some cases multiple cell is the preferred choice. One should also note that even in the cases of wider bridges where there depths are comparatively low the number of cells should be minimized. This is so as there is noticeably not much improvement in the transverse load distribution when the number of cells of the box girder is higher than three or more.
what is batching
Batching:
The process of measurement of the different materials for the making of concrete is known as batching. batching is usually done in two ways: volume batching and weight batching. In case of volume batching the measurement is done in the form of volume whereas in the case of weight batching it is done by the weight.
