Types of Bricks
Bricks may be broadly classified as:
(i) Building bricks
(ii) Paving bricks
(iii) Fire bricks
(iv) Special bricks.
(i)Building Bricks:
These bricks are used for the construction of walls.
(ii)Paving Bricks:
These are vitrified bricks and are used as pavers.
(iii)Fire Bricks:
These bricks are specially made to withstand furnace temperature. Silica bricks
belong to this category.
(iv)Special Bricks:
These bricks are different from the commonly used building bricks with
respect to their shape and the purpose for which they are made. Some of such bricks are listed below:
(a) Specially shaped bricks
(b) Facing bricks
(c) Perforated building bricks
(d) Burnt clay hollow bricks
(e) Sewer bricks
(f ) Acid resistant bricks.
(a)Specially Shaped Bricks:Bricks of special shapes are manufactured to meet the
requirements of different situations.
Bricks may be broadly classified as:
(i) Building bricks
(ii) Paving bricks
(iii) Fire bricks
(iv) Special bricks.
(i)Building Bricks:
These bricks are used for the construction of walls.
(ii)Paving Bricks:
These are vitrified bricks and are used as pavers.
(iii)Fire Bricks:
These bricks are specially made to withstand furnace temperature. Silica bricks
belong to this category.
(iv)Special Bricks:
These bricks are different from the commonly used building bricks with
respect to their shape and the purpose for which they are made. Some of such bricks are listed below:
(a) Specially shaped bricks
(b) Facing bricks
(c) Perforated building bricks
(d) Burnt clay hollow bricks
(e) Sewer bricks
(f ) Acid resistant bricks.
(a)Specially Shaped Bricks:Bricks of special shapes are manufactured to meet the
requirements of different situations.
(b)Facing Bricks:
These bricks are used in the outer face of masonry. Once these bricks are
provided, plastering is not required. The standard size of these bricks are 190 × 90 ×
90 mm or 190 × 90 × 40 mm.
(c)Perforated Building Bricks:
These bricks are manufactured with area of perforation of
30 to 45 per cent. The area of each perforation should not exceed 500 mm
2
. The perforation
should be uniformly distributed over the surface. They are manufactured in the size 190
× 190 × 90 mm and 290 × 90 × 90 mm.
(d)Burn’t Clay Hollow Bricks:
Figure shows a burnt clay hollow brick. They are light
in weight. They are used for the construction of partition walls. They provide good thermal
insulation to buildings. They are manufactured in the sizes 190 × 190 × 90 mm,
290 × 90 × 90 mm and 290 × 140 × 90 mm. The thickness of any shell should not be less
than 11 mm and that of any web not less than 8 mm.
Sewer Bricks:
These bricks are used for the construction of sewage lines. They are
manufactured from surface clay, fire clay shale or with the combination of these. They
are manufactured in the sizes 190 × 90 × 90 mm and 190 × 90 × 40 mm. The average
strength of these bricks should be a minimum of 17.5 N/mm2
. The water absorption
should not be more than 10 per cent.
(f )Acid Resistant Bricks:
These bricks are used for floorings likely to be subjected to acid
attacks, lining of chambers in chemical plants, lining of sewers carrying industrial wastes
etc. These bricks are made of clay or shale of suitable composition with low lime and
iron content, flint or sand and vitrified at high temperature in a ceramic kiln.
