Compressive Strength Formula
Compressive strength formula for any material is the load applied at the point of failure to the cross-section area of the face on which load was applied.
Compressive Strength = Load / Cross-sectional Area
Popular Posts
-
Physical Classification Based on the structure, the rocks may be classified as: • Stratified rocks • Unstratified rocks (i)Stratified ...
-
Types of Surveying Chains: Following are the various types of chain in common use: Metric chains Steel band or Band chain Gunter's ... -
Structural members must be designed to support specific loads. Loads are those forces for which a structure should be proportioned. Loads ... -
HYDRATION:- Clinker is anhydrous (without water) having come from a hot kiln. Cement powder is also anhydrous if we ignore the small amou...
-
For cement plaster there are following steps. Step 1. First of all take measurements normally we take measurements for cement plaster ...
-
Chemical Classification of stone On the basis of their chemical composition engineers prefer to classify rocks as: • Silicious rocks • ...
-
Type of Stones Stones used for civil engineering works may be classified in the following three ways: • Geological • Physical • Chemic...
-
Pick up the incorrect statement from the following A. Side walls of a venturi head flume are splayed out from the end of the throat at...
-
Types of Bricks Bricks may be broadly classified as: (i) Building bricks (ii) Paving bricks (iii) Fire bricks (iv) Special bricks. (i... -
Damp proof course (DPC) is a barrier of impervious material built into a wall or pier to prevent moisture from moving to any part of the b...